Our products:
Our production and selling program consist of most quality
lumber and elements made from hardwood species from our country.
Our most common species are as follows:
Beech wood (Fagus Sylvatica L)
Oak wood (Quercus
petraea (MAT) Liebl.)
We produce in our saw mill oak elements and from other
sources we sell steamed beech lumber, oak lumber and steamed and unsteamed
beech elements.
Specification, quality and packing of our products are by European
standards and agreed with special request from buyers. Dimension are by
standard but can be also produced as per special request of the buyer.
- Oak Elements 25x75x400mm and
up
- Oak Elements 25x100x1000-2000mm
- Oak frisa 25x50/60/75x250,300,350mm
- Steamed Unedged Beech Wood
- Steamed Edged Beech Wood
- Unsteamed and Steamed Beech Elements
- Tilia Unedged lumber
- Tilia Unedged lumber
- Oak Elements
Dimensions
Thickness 25mm(28mm)
Width 75mm(80mm)
Length 400mm(420mm) and
up, length ascending every 100mm
Quality »A«, all sides clear without defects, knots,
sapwood, molding and discolation
»B«, allows health knots, sapwood allowed, without splits
and cracks, no insects and moldings
Moisture content fresh cut (optionally kiln drying)
Packing one
package one length
Protection front of
element
Delivery truck /
container
- Oak Elements
Dimensions
Thickness 25mm(28mm)
Width 100mm(120mm)
Length 1.000mm(1020mm)-2.000(2020)mm,
length ascending every 100mm
Quality »A«, all sides clear without defects, knots,
sapwood, moulding and discolation
»B«, allows health knots, sapwood allowed, without splits
and cracks, no insects and mouldings
Moisture content fresh cut (optionally kiln drying)
Packing one
package one length
Protection front of
element
Delivery truck / container
- Oak frisa 25x50/60/75x250,300,350mm
- Steamed* unedged beech wood
Thickness 25,38,50,60,70,80,100mm
Width 16cm
and up
Length 2m
and up
Quality »A/B«, no knots, splits, red heart, bark
Moisture content fresh
cut or transport dry or kiln dry
Packing three
length in one package
Protection both front
of each plank
Delivery truck (Europe) / container (Far East, Asia, America and Africa) / vessel (Israel (Palestinian Authority), Cyprus, Egypt,
Morocco, Tunisia)
* Same program is possible as
unsteamed
- Steamed Edged Beech Wood
5.1. Length 1,00-2,00m
Thickness 25,38,50,60,70,80,100mm
Width 12cm and up (8-11cm)
Quality »A/B«,
four sides clear, no red heart
Moisture content fresh cut or transport dry or kiln
dry
Packing one length in one package
Protection both front
of each plank
Delivery truck (Europe) / container (Far East, Asia, America and Africa) / vessel (Israel (Palestinian Authority), Cyprus, Egypt,
Morocco, Tunisia)
* Same program is possible as
unsteamed
5.2. Length 2,10m
and up
Thickness 25,38,50,60mm
Width 12cm and up (8-11cm)
Quality »A/B«,
four sides clear, no red heart
Moisture content fresh cut or transport dry or kiln
dry
Packing three length in one package
Protection both front
of each plank
Delivery truck (Europe) / container (Far East, Asia, America and Africa) / vessel (Israel (Palestinian Authority), Cyprus, Egypt,
Morocco, Tunisia)
*
Same program is possible as unsteamed
6. Unsteamed
and Steamed Beech Elements as per buyers request.
7.-8. Tilia
edged and unedged lumber (same specification as beech wood)
For the
countries in our neighbor and for the European countries wood is delivered by
truck.
For the following
countries Israel
(Palestinian Authority), Cyprus,
Egypt, Morocco and Tunisia wood is delivered with
vessel (as general cargo). Minimal quantities for delivery
depends of the final destination but not less than 500m3.
For the
Far East countries, America
and Africa wood is delivered in container.
Packing,
markation and preparing of wood depends from the type of wood, length of wood,
buyers request, way of transport and final destination.
